# Phenomenon of fetching git descriptor from pc using inner side network

**URL:** <https://community.shotgridsoftware.com/t/phenomenon-of-fetching-git-descriptor-from-pc-using-inner-side-network/18108>\
**Category:** Flow Production Tracking\
**Tags:** tk-desktop, configuration\
**Created:** [November 3, 2023, 10:17am UTC](https://community.shotgridsoftware.com/t/phenomenon-of-fetching-git-descriptor-from-pc-using-inner-side-network/18108 "2023-11-03T10:17:59Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![com2144](https://avatars.discourse-cdn.com/v4/letter/c/e274bd/32.png) [@com2144](https://community.shotgridsoftware.com/u/com2144)\
**Post date:** [November 3, 2023, 10:17am UTC](https://community.shotgridsoftware.com/t/phenomenon-of-fetching-git-descriptor-from-pc-using-inner-side-network/18108/1 "2023-11-03T10:17:59Z")

</div>

hi I have some question. I am using locally stored tk-config-default.

1. In the same project, the project configuration was cloned, and the git address was written in the descriptor. By the way, if I run a project, you will refer to git if I run the main primary even on a pc that does not use an external Internet network, so how can I prevent this?

2. locally installed problem solving.Is there any way to block project main primary from app-store instead of switching from .shotgun?

3. and I don’t want use zip config file.